Dock leveler installation and replacement
Replacing a worn-out leveler, adding a dock position, or fitting out a new building? Tell us what you need and we'll connect you with a local company that handles loading dock leveler installation and dock leveler replacement.
Typical prices: service call $150–$400 · most door repairs $200–$1,500 · dock leveler repair $500–$3,000 · new dock leveler $5,000–$15,000 installed. See the cost guide.
Request service- Free referral service: independent local companies pay us a marketing fee, not you
- Independent local companies that work on commercial doors and docks
- You get the quote directly from the company doing the work
When a new leveler makes sense
- The old leveler keeps failing, or its parts are no longer made.
- The deck or frame is cracked, or the pit is damaged.
- Your trucks or forklifts have changed: heavier loads, electric forklifts, or trailers at very different heights.
- You're adding a dock position, or fitting out a new or newly leased building.
- You want to move from a mechanical (pull-chain) leveler to push-button hydraulic.
If the leveler is otherwise sound, most problems are repairs. See dock leveler repair.
Types of dock leveler
- Hydraulic dock leveler (pit style). Sits in a concrete pit and is raised by push button. The most common choice for busy loading docks.
- Mechanical dock leveler (pit style). Raised with a pull chain and springs. Lower upfront cost, more wear on staff and springs.
- Air-powered. Raised by an air bag; push-button like hydraulic, without hydraulic fluid.
- Edge-of-dock. A short plate mounted on the dock face. No pit needed, but it only handles small height differences.
- Vertical-storing. Stands upright when not in use so the door can close tight against the dock floor. Common at cold storage and food plants.
What the installer will ask
- The heaviest loads crossing the leveler, including the forklift and its load.
- The range of trailer bed heights you receive, from low containers to high reefers.
- The size and condition of the existing pit, if there is one.
- How many times a day the dock is used, and whether the building is heated or refrigerated.
- Whether other loading dock equipment (the dock door, seals, bumpers or vehicle restraint) should be replaced at the same time.
Cost and timing
An installed pit leveler commonly costs several thousand dollars; our cost guide gives a rough range. Price depends on the type, size and capacity, and on whether the pit needs concrete work. Replacing a leveler in an existing pit can often be done in a day once the unit arrives; new pits or major concrete repair take longer. Ask about lead time, because some units are built to order.
Dock leveler installation: common questions
How long does it take to replace a dock leveler?
Swapping a leveler in an existing pit in good condition is often a one-day job once the new unit is on site. New pits, pit repairs and concrete work add days, and the dock position is out of service while the concrete cures.
What capacity leveler do we need?
The installer works it out from your heaviest forklift and load and how often the dock is used. Busy docks and heavy electric forklifts need a higher capacity rating than the load alone suggests.
Can a new leveler fit our old pit?
Often yes, if the pit is a standard size and the concrete and curb angles are sound. The installer measures the pit and checks its condition before quoting.
Hydraulic or mechanical?
Hydraulic levelers cost more upfront but are push-button, easier on staff and usually need fewer spring repairs. Mechanical levelers suit lighter, less frequent use.
Do you install the levelers yourselves?
No. Commercial Door Repair Now connects you with an independent local company that installs dock equipment. They quote and do the work.
Need a door or dock fixed?
Use the form at the top of this page.